Little Shower solar shower terminal +

Our installation advice:

• To install your Little Shower + solar shower, make sure you choose the ideal location, i.e. the location most exposed to the sun (ideally 360°), if possible, make sure that it is close to a water supply and a drain.
• The Little Shower + solar shower terminal is very easy to install; simply secure it to a stable surface, such as a wooden or concrete slab, using the provided anchor screws. Once installed, all you have to do is connect it to a water source or a standard garden hose.
• Install the pressure reducer provided. This pressure reducer must be properly connected to the water inlet between the shower and the quick connector.
• The Little Shower + solar shower is designed for use under "normal" mains water supply conditions. Ensure that the pressure is below 3 bars.

For the first use of your solar shower terminal:

• Open the mixer tap and let the air out of the tank of your solar shower terminal so that it fills with water.
• As soon as water starts to flow from the shower head, close the faucet. You have access to cold water immediately; to use hot water, you will have to wait until the water is heated by the sun's rays.

Our usage tips:

• Before taking a shower, we recommend always setting the mixer tap to the "Cold" position and then adjusting it to your liking. During periods of intense heat, the water in the solar shower tank can reach temperatures of up to 60°C.
• Please note that when you turn off the mixer tap on your Little Shower + solar shower, it is completely normal for water to continue to flow for a few seconds.
• In the event of a thunderstorm, we recommend that you do not use your Little Shower+ solar shower terminal to avoid any risk of lightning.

• Wintering:
  At the end of the season and absolutely before the outside temperature drops below zero, winterize your shower.

1- Close the cold water tap to which your garden hose is connected and disconnect the garden hose.

2- Unscrew the drain plug located at the bottom of the tank then open the mixer tap fully to the hot water position (red) NOTE: Be careful not to face the drain plug when you open the mixer tap, to avoid being sprayed. The tank will take several minutes to empty completely. CAUTION: Do not close the mixer tap until the tank is empty. Closing the mixer tap stops the tank from emptying.

3- Clean the components of your shower with clean water.

4- Store your shower in a dry, frost-free, and protected place during the winter. The warranty does not cover damage due to frost.

• Warnings:

Do not use salt or any other anti-freeze product, this will void your shower warranty.
Maximum water supply pressure: 3 bars.
Always start your shower with the mixer tap in the "cold water" position to avoid the risk of scalding.
Never let a child use the shower alone.
If you will not be using your shower for a long period of time, completely drain the tank to prevent the growth of bacteria.